GAS Cartridge - 350 bar
Direct acting - Ball Type

More details

A screw-in, direct acting, ball type in-line check valve.
Main use is as a blocking or load-holding device.
The CVB0.G18 allows flow passage from port 1 to 2: the cartridge
has a fully guided check which is spring-biased closed until
sufficient pressure is applied at port 1 to open to 2
The flow is blocked in the opposite direction (2 to 1).

Technical Features
External surfaces are oxide burnished and corrosion-protected.
All valve parts are made of high strength steel.
Reversed installation is possible (except for size G18) yet not rec-
Compact size.
Gas cavity.

Performance Details

Tecnichal Data

Maximum operating pressure 350 bar
Maximum flow (see table in the page bottom)
Internal leakage 0.10 cc/min max @350 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
orientation no restrictions
installation torque (see table in the page bottom)
seal kit code (see table in the page bottom)
weight (see table in the page bottom)

NOTE: The performance chart illustrates flow handling capacity. P/Q curves are recorded at TOil = 40°C and 46 cSt

Ordering Code

All rights reserved
Credits by Studio I.T.C.