FRD0.S08 Valve Series

Hybrid SAE08 Cartridge - 250 bar
Direct acting - Pressure Compensated

More details

Description
A direct acting, drop-in insert type, 2-way pressure compensated
flow control valve.
The flow rate of this valve in the 1 to 2 flow path is largely
independent of the system pressure and is determined by the
dimension of a calibrated orifice.
The valve cannot be adjusted for variable flow output.
Free flow in the 2 to 1 path is allowed and not pressure
compensated.

Technical Features
External surfaces are oxide burnished and corrosion-protected.
All valve parts are made of high strength steel. Spool is hardened
and ground to guarantee low wear and to extend service life.
Optional: upon request a calibrated steel wire can be installed
inside the spring chamber in order to prevent possible orifice
obstruction (recommended for rated flows below 2 l/min).
Suitable for heavy duty applications.
Extremely compact size.

Performance Details

Tecnichal Data

Maximum operating pressure 250 bar
Maximum pressure compensated flow 12 l/min
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
orientation no restrictions
seal kit code SK.060
weight 0.013 kg

NOTE: The performance chart illustrates flow handling capacity in the pressure compensated mode for a few significant flow settings. P/Q curves are recorded at TOil = 40°C and 46 cSt.

Ordering Code

All rights reserved
Credits by Studio I.T.C.