-
- Check Valves
- Pilot Check Valves
- PO Directional Valves
- Pressure Compensator
- Relief Valves
- Relief Valves Bi-directional
- PO Relief Valves
- PO Relief and Anti-cav. Valves
- Relief and Anti-cav. Valves
- Pressure Reducing Valves
- Sequence Valves
- Shuttle Valves
- Flow Controls
- Solenoid Valves
- Proportional Solenoid Valves
- Coils
- Solenoid Connectors
- Solenoid Valve Manual Override
- Cavity Plugs
- Proportional Regulator / Coil Connector
FRC0.S10 Valve Series
SAE Cartridge - 250 bar
Direct acting - Pressure Compensated
Description
A direct acting, screw-in cartridge, 2-way pressure compensated
flow control valve.
The flow rate of this valve in the 1 to 2 flow path is largely
independent of the system pressure and is determined by the
dimension of a calibrated orifice.
The valve cannot be adjusted for variable flow output.
Free flow in the 2 to 1 path is allowed and not pressure
compensated.
Technical Features
External surfaces are zinc plated and corrosion-protected.
All valve parts are made of high strength steel. Spool is hardened
and ground to guarantee low wear and to extend service life.
Suitable for heavy duty applications.
Compact size.
Industry SAE common cavity.
Performance Details
Tecnichal Data
| Maximum operating pressure | 250 bar |
| Maximum pressure compensated flow | 20 l/min |
| temperature | -30°C to 110°C |
| fluids | Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt |
| orientation | no restrictions |
| installation torque | 40-45 Nm |
| seal kit code | SK.032 |
| weight | 0.090 kg |
NOTE: The performance chart illustrates flow handling capacity in the pressure compensated mode. P/Q curves are recorded at TOil = 40°C and 46 cSt.
Ordering Code
