SPC0.S08 Valve Series

Hybrid SAE08 Cartridge - 420 bar
Direct acting check valve - Pilot Piston to open

More details

Description
Normally closed, single pilot check valve.
Cartridge is closed until sufficient pressure is applied on port 1 to
reach the bias spring setting, lift the poppet and allow free flow to
2.
The valve is normally closed from 2 to 1.
When sufficent pressure is applied on port 3, the pilot piston lifts
the poppet from its seat and allows flow from 2 to 1.
Very limited leakage in the check condition.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to guarantee minimal wear and to extend service life.
Pilot piston is hardened and ground, sealed to prevent leakage.
Optional bias springs for back-pressure application flexibility.
Industry commonly used hybrid cavity.

Performance Details

Tecnichal Data

Maximum operating pressure 420 bar
Maximum flow 50 l/min
Internal leakage 0.10 cc/min max @420 bar
Pilot ratio 4.5:1
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 o 420 cSt
orientation no restrictions
installation torque 40 - 45 Nm
seal kit code SK.045
weight 0.068 kg

NOTE: The performance chart illustrates flow handling capacity for significant spring options. P/Q curves are recorded at TOil = 40°C and 46 cSt

Ordering Code

All rights reserved
Credits by Studio I.T.C.