Hybrid SAE Cartridge - 200 bar
Directional Valve - 3/2 Spool type
A 3 way 2 positions, spool type, direct acting, screw-in hydraulic,
directional cartridge valve.
The DVC0.S08 allows flow from 2 to 3. Once sufficient pressure
is applied on port 1, the spool lifts allowing free flow from 1 to 2
while blocking port 3.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
All external surfaces are corrosion protected.
All valve parts are made of high strength steel. Spool and cage are
hardened and super-finished to ensure minimal wear and extended
Industry commonly used hybrid cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||200 bar|
|Maximum flow||20 l/min|
|Internal leakage||200 cc/min max @200 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|installation torque||40 - 45 Nm|
|seal kit code||SK.062|
NOTE: The performance chart illustrates flow handling capacity 2 to 3 and 1 to 2 P/Q curves are recorded at TOil = 40°C and 46 cSt