RVQ0.M22 Valve Series

METRIC Cartridge - 420 bar
Pilot Operated - Spool Type

More details

A screw-in, cartridge style, pilot operated (2-stage), spool type,
normally closed, hydraulic relief valve.
When the pressure at the Inlet (1) reaches the valve setting, the
pilot poppet starts to open from its seat and determines the
shifting of the main stage poppet (spool type) that throttles oil flow
to tank (2).
The cartridge offers smooth transition in response to load changes
in demanding hydraulic circuits.
Fast, smooth response and limited hysteresis.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Spool and cage are
hardened and micron finished in order to guarantee minimal wear
and to extend service life.
Adjustment screw cannot be backed out of the valve.
Optional spring ranges to 420 bar (6100 psi)
Back pressure on the tank port (port 2) is directly additive to the
valve setting at a 1:1 ratio.
Metric cavity.

Performance Details

Technical Data

Maximum operating pressure 420 bar
Maximum flow 120 l/min
Maximum internal leakage 100 cc/min to 90% of nominal set point
Factory pressure settings established @5 l/min
Reseat pressure nominal 90% of crack pressure
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
orientation no restrictions
installation torque 55-65 Nm
seal kit code SK.052
weight 0.207 kg

NOTE: The performance chart illustrates flow handling capacity at maximum setting for each spring range option. P/Q curves are recorded at TOil = 40°C and 46 cSt

Ordering Code

All rights reserved
Credits by Studio I.T.C.