PFR0.S08 Valve Series

SAE Cartridge - 250 bar
Solenoid Valve - 2 way proportional flow control

More details

Description
The PFR0 is a proportional solenoid operated, two-way, poppet-
type, normally closed, screw-in hydraulic cartridge valve for low
leakage blocking and load-holding applications.
When de-energized, the valve operates as a check valve and allows
flow from 2 to 1, while blocking flow from 1 to 2.
When energized, the 1 to 2 flow path is opened: flow is directly
proportional to the current applied to the coil.

Technical Features
All External surfaces are zinc plated and corrosion proof.
All valve parts are made of high strength steel.
Poppet and seat are hardened and micron finished to guarantee
minimal wear and to extend service life.
Efficient wet armature design.
Industry SAE common cavity.

Performance Details

Tecnichal Data

Maximum operating pressure 250 bar
Maximum flow 30 l/min
Maximum pressure compensated flow max 0.25 cc/min @ 250 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 40-45 Nm
seal kit code SK.070 and SK.030 (for coil)
weight 0.150 kg

NOTE: The performance charts illustrate flow regulations @ different Dp (-> energized @ 24Vdc) and the flow handling capacity 1 to 2 (->energized with max current @ 24Vdc).

Ordering Code

Coils

All rights reserved
Credits by Studio I.T.C.