SAE Cartridge – 300 bar
Direct acting with external Pilot and Vent
The SQC0.M22 is a screw in, cartridge style, direct acting, spool
type hydraulic sequence valve with external pilot.
Spring chamber is constantly air vented.
The valve is designed to close flow connection between two ports
that were previously connected.
In the idle condition, the SCQ0.M22 allows flow to pass from 2 to
3. Once pilot pressure at 1 attains the spring setting the spool shifts
and blocks flow between ports 2 and 3.
All External surfaces are zinc plated and corrosion proof.
All valve parts are made of high strength steel. Spool and cage are
hardened and micron finished to guarantee minimal wear and to
extend service life.
Optional spring range up to 40 bar.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||300 bar|
|Maximum flow||40 l/min|
|Maximum internal leakage||50 cc/min measured in port 2 at 300 bar when pilot in port 1 is activated|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|installation torque||45-50 Nm|
|seal kit code||SK.068|
NOTE: The performance chart illustrates flow handling capacity 2 to 3 and 3 to 2 (both energized)