SAE Cartridge – 250 bar
Direct acting with internal Pilot and Vent
The SQC0.S08 is a screw in, cartridge style, direct acting, spool type
hydraulic sequence valve with internal pilot.
This valve has a spring chamber drain and is designed to direct
oil to a secondary circuit once a predetermined pressure level is
reached in the primary circuit.
In the idle condition, the SQC0.S08 blocks flow at 1, and also allows
no connection between 2 and 3. Once pressure setting is reached,
the spool shifts and puts in connection ports 1 and 2, while block-
ing flow at 3.
Note that the back pressure at port 3 is directly additive to the
spring setting value
All External surfaces are zinc plated and corrosion proof.
All valve parts are made of high strength steel. Spool is hardened
and micron finished to guarantee minimal wear and to extend
Optional spring range up to 135 bar.
Optional plastic tamper proof cap.
Industry common cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||250 bar|
|Maximum flow||25 l/min|
|Maximum internal leakage||50 cc/min @ nominal pressure setting on port 1|
|Factory pressure settings||established @10 l/min|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|installation torque||45-50 Nm|
NOTE: The performance chart illustrates flow handling capacity at maximum setting for each spring range option. P/Q curves are recorded at TOil = 40°C and 46 cSt