-
- Check Valves
- Pilot Check Valves
- PO Directional Valves
- Pressure Compensator
- Relief Valves
- Relief Valves Bi-directional
- PO Relief Valves
- PO Relief and Anti-cav. Valves
- Relief and Anti-cav. Valves
- Pressure Reducing Valves
- Sequence Valves
- Shuttle Valves
- Flow Controls
- Solenoid Valves
- Proportional Solenoid Valves
- Coils
- Solenoid Connectors
- Solenoid Valve Manual Override
- Cavity Plugs
- Proportional Regulator / Coil Connector
SHC0.M22 Valve Series
METRIC Cartridge - 350 bar
Direct acting - Ball Type
Description
Shut-off valves for hydraulics systems, with two inlets and one
outlet.
Ball seat construction, automatic switching.
The inlet with the higher pressure (port 1 or 3) is directly connected
to tank (port 2), while the second inlet (port 3 or 1) is shut off.
Technical Features
All valve parts are made of high strength steel to guarantee
minimal wear and to extend service life.
The very compact size make it suitable for installation into hydraulic
integrated circuits, control units, and various valve combinations.
Metric cavity.
Performance Details
Technical Data
| Maximum operating pressure | 350 bar |
| Maximum flow | 60 l/min |
| Internal leakage | 0.25 cc/min max @ 350 bar |
| temperature | -30°C to 110°C |
| fluids | Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt |
| orientation | no restrictions |
| installation torque | 55-65 Nm |
| seal kit code | SK.042 |
| weight | 0.102 kg |
NOTE: The performance chart illustrates flow handling capacity in max flow condition. P/Q curves are recorded at TOil = 40°C
and 46 cSt
Ordering Code
