SVT0.S08 Valve Series

SAE Cartridge - 350 bar
NC Single Lock Pilot Operated - Poppet Type

More details

Solenoid operated, 2-way 2-positions, normally closed, piloted    
poppet type, screw-in cartridge valve.    
Typically used as a blocking or load holding device for high pressure
circuits. When the coil is de-energized, the SVT0.S08 acts as check
valve allowing free flow from 1 to 2, while blocking from 2 to 1.
When the coil is energized the poppet lifts and opens both the 2 to
1 and the 1 to 2 flow paths.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to ensure minimal wear and extended service life.
Coil seals protect the solenoid system.
Manual override options.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 350 bar
Maximum flow 40 l/min
Internal leakage max 5 drops/min @ 350 bar
Response time Energized 30 ms, De-energized 50 ms (typical 24V DC coil)
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 40-45 Nm
seal kit code SK.030 and SK.027 (coil)
weight 0.110 kg

NOTE: The performance chart illustrates flow handling capacity in both directions (1 to 2 and 2 to 1, both energized). P/Q curves are recorded at TOil = 40°C and 46 cSt

Ordering Code


All rights reserved
Credits by Studio I.T.C.