SAE Cartridge - 250 bar
NC Double Lock Direct Acting - Poppet Type
Solenoid operated, 2-way 2-positions, normally closed, direct acting
poppet type, bi-directional blocking, screw-in cartridge valve.
Special design for low leakage in load holding applications.
When the coil is de-energized, the SVD5.S08 blocks flow in both
directions. Once the coil is energized, the valve’s poppet opens and
allows free flow from 1 to 2 and from 2 to 1.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
Override option: to manually override, push and hold the override
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to ensure minimal wear and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||250 bar|
|Maximum flow||30 l/min|
|Internal leakage||max 5 drops/min @ 250 bar|
|Response time||Energized 20 ms, De-energized 40 ms (typical 24V DC coil)|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||40-45 Nm|
|seal kit code||SK.003 and SK.027 (coil)|
NOTE: The performance chart illustrates flow handling capacity in both directions (1 to 2 and 2 to 1). P/Q curves are recorded at TOil = 40°C and 46 cSt
For information about operating limits, please contact the factory.