SAE Cartridge - 250 bar
Directional Valve - 2/2 Spool type
A Solenoid operated, 2 way 2 positions, spool type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, bidirectional flow is allowed between
ports 1 and 2.
In the energized mode, the SVF0.S08 blocks flow bydirectionally.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool is hardened and micron finished to ensure minimal wear and
extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||250 bar|
|Maximum flow||10 l/min|
|Internal leakage||max 80 cc/min @ 250 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||35-40 Nm|
|seal kit code||SK.003 and SK.027 (coil)|
NOTE: The performance chart illustrates flow handling capacity 1 to 2 and 1 to 2 (both de-energized). P/Q curves are recorded at TOil= 40°C and 46 cSt