METRIC Cartridge - 210 bar
Directional Valve - 3/2 Spool type
A Solenoid operated, 3 way 2 positions, spool type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, the SVP0.M18 allows flow bidirectionally
between ports 1 and 3, while blocking flow at 2.
In the energized mode, bidirectional flow is allowed between ports
1 and 2, while flow is blocked at 3.
Even if port 1 may be fully pressurized, it is not intended to be used
as the inlet.
Low pressure drop thanks to optimized flow path.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool and cage are hardened and super-finished to ensure minimal
wear and extended service life.
Coil seals protect the solenoid system.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||210 bar|
|Maximum flow||7 l/min|
|Internal leakage||max 20 cc/min @ 210 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||10-15 Nm|
|seal kit code||SK.034 and SK.027 (for coil)|
NOTE: The performance chart illustrates flow handling capacity 1 to 3 (de-energized) and 1 to 2 (energized). P/Q curves are recorded at TOil = 40°C and 46 cSt
For information about operating limits, please contact the factory.