METRIC Cartridge - 210 bar
Directional Valve - 3/2 Spool type
A Solenoid operated, 3 way 2 positions, spool type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, the SVP0.M18 allows flow bidirectionally
between ports 1 and 2, while blocking flow at 3.
In the energized mode, bidirectional flow is allowed between ports
1 and 3, while flow is blocked at 2.
Even if port 1 may be fully pressurized, it is not intended to be used
as the inlet.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool and cage are hardened and super-finished to ensure minimal
wear and extended service life.
Coil seals protect the solenoid system.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||210 bar|
|Maximum flow||7 l/min|
|Internal leakage||max 20 cc/min @ 210 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||10-15 Nm|
|seal kit code||SK.034 and SK.027 (for coil)|
NOTE: The performance chart illustrates flow handling capacity 1 to 2 (de-ener- gized) and 1 to 3 (energized). P/Q curves are recorded at TOil = 40°C and 46 cSt