Hybrid SAE Cartridge - 230 bar
Directional Valve - 3/2 Spool type
A Solenoid operated, 3 way 2 positions, spool type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, the SVP4.S08 allows flow bidirectionally
between ports 2 and 3, while blocking flow at 1.
In the energized mode, bidirectional flow is allowed between ports
1 and 2, while flow is blocked at 3.
Even if port 1 may be fully pressurized, it is not intended to be used
as the inlet.
Low pressure drop thanks to optimized flow path.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool is hardened and micron finished to ensure minimal wear and
extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||230 bar|
|Maximum flow||7 l/min|
|Internal leakage||max 75 cc/min @ 230 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||25-30 Nm|
|seal kit code||SK.061 and SK.027 (for coil)|
NOTE: The performance chart illustrates flow handling capacity 2 to 3 (de-energized) and 1 to 2 (energized). P/Q curves are recorded at TOil = 40°C and 46 cSt
For information about operating limits, please contact the factory.