SVP0.S08-4

SAE Cartridge - 250 bar
Directional Valve - 3/2 Spool type

More details

Description
A Solenoid operated, 3 way 2 positions, spool type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, the SVP0.S08 allows flow bidirectionally
between ports 1 and 2, while blocking flow at 3.
In the energized mode, bidirectional flow is allowed between ports
1 and 3, while flow is blocked at 2.
Even if port 1 may be fully pressurized, it is not intended to be used
as the inlet.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool is hardened and micron finished to ensure minimal wear and
extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 250 bar
Maximum flow 12 l/min
Internal leakage max 85 cc/min @ 250 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 35-40 Nm
seal kit code SK.035 and SK.027 (coil)
weight 0.140 kg

NOTE: The performance chart illustrates flow handling capacity 1 to 2 (de-energized) and 1 to 3 (energized). P/Q curves are recorded at TOil = 40°C and 46 cSt

For information about operating  limits, please contact the factory

Ordering Code

Coils

All rights reserved
Credits by Studio I.T.C.