SAE Cartridge - 250 bar
Directional Valve - 3/2 Seated type

More details

A Solenoid operated, 3 way 2 positions, seated type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, the SVC0.S08 allows flow bidirectionally
between ports 2 and 3, while blocking flow at 1. In this stage the
leakage on port 1 is very limited.
In the energized mode, bidirectional flow is allowed between ports
1 and 2, while flow is blocked at 3 with a low leakage.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Poppet is hardened and micron finished to ensure minimal wear
and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 250 bar
Maximum flow 10 l/min
Leakage on port 1 max 5 drops/min @ 250 bar
Leakage max 85 cc/min @ 250 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 35-40 Nm
seal kit code SK.035 and SK.027 (coil)
weight 0.140 kg

NOTE: The performance chart illustrates flow handling capacity 2 to 3 (de-en) and 1 to 2 (en). P/Q curves are recorded at TOil = 40°C and 46 cSt

For information about operating  limits, please contact the factory

Ordering Code


All rights reserved
Credits by Studio I.T.C.