SAE Cartridge - 250 bar
Directional Valve - 3/2 Seated type
A Solenoid operated, 3 way 2 positions, seated type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode, the SVC0.S08 allows flow bidirectionally
between ports 2 and 3, while blocking flow at 1. In this stage the
leakage on port 1 is very limited.
In the energized mode, bidirectional flow is allowed between ports
1 and 2, while flow is blocked at 3 with a low leakage.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Poppet is hardened and micron finished to ensure minimal wear
and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||250 bar|
|Maximum flow||10 l/min|
|Leakage on port 1||max 5 drops/min @ 250 bar|
|Leakage||max 85 cc/min @ 250 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||35-40 Nm|
|seal kit code||SK.035 and SK.027 (coil)|
NOTE: The performance chart illustrates flow handling capacity 2 to 3 (de-en) and 1 to 2 (en). P/Q curves are recorded at TOil = 40°C and 46 cSt
For information about operating limits, please contact the factory