SVI0.S10 Valve Series

SAE Cartridge - 250 bar
Directional Valve - 3/2 Seated type

More details

Description
A Solenoid operated, 3 way 2 positions, seated type, direct act-
ing, bi-directional blocking, screw-in hydraulic directional cartridge
valve.
In the de-energized mode, the SVI0.S10 allows flow bi-directionally
between ports 1 and 2, while blocking flow at 3. In the energized
mode, bi-directional flow is allowed between ports 3 and 2, while
flow is blocked at 1 with extremely low leakage.
Even if port 1 and 3 maybe fully pressurized they are not intended
to be used as the inlet.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Poppet is hardened and micron finished to ensure minimal wear
and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 250 bar
Maximum flow 20 l/min
Leakage max 5 drops/min @ 250 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 35-40 Nm
seal kit code SK.076 and SK.070 (coil)
weight 0.231 kg

NOTE: The performance chart illustrates flow handling capacity 2 to 3 (energized) and 2 to 1 (de-energized). P/Q curves are recorded at TOil = 40°C and 46 cSt

For information about operating limits, please contact the factory. 

Ordering Code

Coils

All rights reserved
Credits by Studio I.T.C.