SAE Cartridge - 250 bar
Directional Valve - 4/2 Spool type

More details

A solenoid-operated, 4-way, 2-position, spool-type, direct-acting,
screw-in hydraulic cartridge valve.
In the de-energized mode the SVA0.S08 flow paths are 1 to 4 and 3
to 2.
In the energized mode the valve’s spool shifts to open 1 to 2 and 3
to 4.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
All ports are connected at crossover.
Low pressure drop thanks to optimized paths.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool and cage are hardened and super-finished to ensure minimal
wear and extended service life.
Coil seals protect the solenoid system.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 250 bar
Maximum flow 12 l/min
Internal leakage max 150 cc/min @ 250 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 25-30 Nm
seal kit code SK.065 e SK.027 (for coil)
weight 0.160 kg

NOTE: the performance chart illustrates flow handling capacity 1 to 4 and 3 to 2 (de-energized) and 3 to 4 and 2 to 1 (energized)

For information about operating limits, please contact the factory. 

Ordering Code


All rights reserved
Credits by Studio I.T.C.