SAE Cartridge - 250 bar
Directional Valve - 4/2 Spool type
A solenoid-operated, 4-way, 2-position, spool-type, direct-acting,
screw-in hydraulic cartridge valve.
In the de-energized mode the SVA0.S08 blocks flow at all ports.
In the energized mode the valve’s spool shifts to open 1 to 2 and 3
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized paths.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool and cage are hardened and super-finished to ensure minimal
wear and extended service life.
Coil seals protect the solenoid system.
Industry SAE common cavity.
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||250 bar|
|Maximum flow||12 l/min|
|Internal leakage||max 150 cc/min @ 250 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||25-30 Nm|
|seal kit code||SK.065 e SK.027(for coil)|
NOTE: the performance chart illustrates flow handling capacity 3 to 4 and 2 to 1 (energized)
For information about operating limits, please contact the factory.