SAE Cartridge - 250 bar
Directional Valve - 4/3 Spool type

More details

A Solenoid operated, 4 way 3 positions, spool type, direct acting,
screw-in hydraulic directional cartridge valve.
In the de-energized mode ports 1 and 2 are connected while port
3 and 4 are blocked
When coil S1 (lower coil) is energized flow is allowed from 3 to 4
and from 2 to 1.
When coil S2 (upper coil) is energized flow is allowed from 3 to 2
and from 4 to 1.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow paths.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Spool and cage are hardened and super-finished to ensure minimal
wear and extended service life.
Coil seals protect the solenoid system.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 250 bar
Maximum flow 10 l/min
Internal leakage max 120 cc/min @ 250 bar
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 40-45 Nm
seal kit code SK.065 and SK.027 (for coil)
weight 0.182 kg

NOTE: The performance chart illustrates flow handling capacity 3 to 4 and 2 to 1 (energized S1) and 3 to 2 and 4 to 1 (energized S2).
P/Q curves are recorded at TOil = 40°C and 46 cSt

For information about operating limits, please contact the factory. 

Ordering Code


All rights reserved
Credits by Studio I.T.C.