SVK0.S10 Valve Series

SAE Cartridge - 350 bar
NO Single Lock Pilot Operated - Poppet Type

More details

Description
Solenoid operated, 2-way 2-positions, normally open, piloted
poppet type, screw-in cartridge valve.
Typically used as a blocking or load holding device for high pressure
circuits. When the coil is de-energized, the SVM0.S08 allows flow
bidirectionally from 2 to 1, and from 1 to 2.
When the coil is energized the valve closes, blocking flow from 2
to 1.    
In this mode, flow from 1 to 2 is allowed once the pressure
overcomes the force of the solenoid.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to ensure minimal wear and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.

Note: Standard sealing NBR (BUNA-N)

Performance Details

Technical Data

Maximum operating pressure 350 bar
Maximum flow 80 l/min
Internal leakage max 5 drops/min @ 350 bar
Response time Energized 20 ms, De-energized 30 ms (typical 24V DC coil)
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 65-75 Nm

Ordering Code

Coils

All rights reserved
Credits by Studio I.T.C.