SAE Cartridge - 250 bar
Directional Valve - 3/2 Seated type
A Solenoid operated, 3 way 2 positions, seated type, direct act-
ing, bi-directional blocking, screw-in hydraulic directional cartridge
In the de-energized mode, the SVI0.S10 allows flow bi-directionally
between ports 1 and 2, while blocking flow at 3. In the energized
mode, bi-directional flow is allowed between ports 3 and 2, while
flow is blocked at 1 with extremely low leakage.
Even if port 1 and 3 maybe fully pressurized they are not intended
to be used as the inlet.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel.
Poppet is hardened and micron finished to ensure minimal wear
and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.
Note: Standard sealing NBR (BUNA-N)
This product is no longer in stock
Warning: Last items in stock!
|Maximum operating pressure||250 bar|
|Maximum flow||10 l/min|
|Leakage||max 5 drops/min @ 250 bar|
|temperature||-30°C to 110°C|
|fluids||Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt|
|Minimum pull-in voltage||85% of nominal|
|installation torque||35-40 Nm|
|seal kit code||SK.076 and SK.070 (coil)|
NOTE: The performance chart illustrates flow handling capacity 2 to 3 (energized) and 2 to 1 (de-energized). P/Q curves are recorded at TOil = 40°C and 46 cSt
For information about operating limits, please contact the factory.