SVY0.S08 Valve Series

SAE Cartridge - 350 bar
NC Double Lock Pilot Operated - Poppet Type

More details

Solenoid operated, 2-way 2-positions, normally opened, piloted poppet type, bi-directional blocking, screw-in cartridge valve. Special design for low leakage in load holding applications. Tipically used as a blocking or load holding device for high pressure circuits. When the coil is de-energized, the valve’s poppet opens and allows free flow from 1 to 2 and from 2 to 1. Once the coil is energized, the SVY0.S08 blocks flow in both directions. The rigid design using a 1-piece body contributes to minimize the effect of eccentricities in cavity and provides great reliability. Low pressure drop thanks to optimized flow path

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to ensure minimal wear and extended service life.
Coil seals protect the solenoid system.
Manual override option.
Industry SAE common cavity.

Performance Details

Technical Data

Maximum operating pressure 350 bar
Maximum flow 40 l/min
Internal leakage 0,25 cc/min @ 350 bar
Response time Energized 100 ms, De-energized 50 ms (typical 24V DC coil)
temperature -30°C to 110°C
fluids Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Minimum pull-in voltage 85% of nominal
orientation no restrictions
installation torque 40-45 Nm
seal kit code SK.030 and SK.027 (coil)
weight 0.148 kg

NOTE: The performance chart illustrates flow handling capacity in both directions (1 to 2 and 2 to 1). P/Q curves are recorded at TOil = 40°C and 46 cSt.

Ordering Code


All rights reserved
Credits by Studio I.T.C.