SQD0.M22 Valve Series

Metric Cartridge – 300 bar
Direct acting with external Pilot and Vent

Подробнее

Description
The SQD0.M22 is a screw in, cartridge style, direct acting, spool
type hydraulic sequence valve with external pilot.
Spring chamber is constantly air vented.
The valve is designed to close flow connection between two ports
that were previously connected.
In the idle condition, the SCD0.M22 allows flow to pass from 2 to
3. Once pilot pressure at 1 attains the spring setting the spool shifts
and blocks flow between ports 2 and 3 in both directions.

Technical features
All External surfaces are zinc plated and corrosion proof.
All valve parts are made of high strength steel. Spool and cage are
hardened and micron finished to guarantee minimal wear and to
extend service life.
Metric cavity.

Performance Details

Tecnichal Data

Максимальное рабочее давление 300 bar
Максимальный поток 40 l/min
Максимальные внутренние потери 50 cc/min measured in port 2 at 300 bar when pilot in port 1 is activated
Температура -30°C to 110°C
Жидкости Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt
Ориентация no restrictions
Момент затяжки 45-50 Nm
Набор уплотнений SK.068
Масса 0.328 kg

NOTE: The performance chart illustrates flow handling capacity 2 to 3 and 3 to 2 (idle position). p/Q curves are recorded at TOil = 40°C and 46 cSt

Ordering Code

Все права защищены
РазработаноStudio I.T.C.