SVC0.S08
SAE Cartridge - 250 bar
Directional Valve - 3/2 Seated Type
Description
A solenoid valve operated, 3 way 2 positions, seated type, direct acting, screw-in hydraulic directional cartridge valve. In the de-energized mode, the SVC0.S08 allows flow bidirectionally between ports 2 and 3, while blocking flow at 1. In this stage the leakage on port 1 is very limited. As soon as the coil is energized there is a transitory phase in which all the ports are blocked. In the energized mode, bidirectional flow is allowed between ports 1 and 2, while flow is blocked at 3 with a low leakage. The rigid design using a 1-piece body contributes to minimize the effect of eccentricities in cavity and provides great reliability. Low pressure drop thanks to optimized flow path.
Cross Section
Cavity Details
Technical Data
Maximum operating pressure
250 bar
Maximum flow
10 l/min
Maximum internal leakage
85 cm3/min @ 250 bar 0,25 cm3/min @ 250 bar on port 1
External component treatment
Zn/Fe - standard (96h)Zn/Ni (720h) - Upon customer request
O-ring temperature range
-30 ° C to 110 ° C (standard sealing NBR - BUNA - N)-35 ° C to 140 ° C - HNBR - Upon customer request-23 ° C to 225 ° C - FKM - Upon customer request
Oil temperature range
-30 ° C to 110 ° C
Fluids
Mineral - based or synthetics with lubricating properties
Viscosities
7,4 to 420 cSt
Minimum pull-in voltage
85% of nominal
Filtration
20 / 18 / 15 ISO 4406 (maximum filtration admitted)
Orientation
No restrictions
Installation torque
35 - 40 Nm  Hex 24
Oil testing condition
ISO VG 46 cSt
Seal Kit
SK.035 and SK.027 (coil)
Coil
Weight
0,140 Kg
Performance details