PCD0.S10
SAE Cartridge - 250 bar
Proportional Solenoid Valve
Description
The PCD0 is a proportional solenoid operated, direct acting, poppet type, two way, screw-in hydraulic cartridge normally closed pressure compensated flow regulator. When de-energized the flow is fully restricted. When energized the regulated flow is proportional to the applied control current. The regulated flow rate is independent of the pressure differential between the ports.
Cross Section
Cavity Details
Technical Data
Maximum operating pressure
250 bar
Maximum flow
30 l/min
Maximum internal leakage
20 cm3/min @ 30 bar 150 cm3/min @ 250 bar
Pressure Compensation Range
30 - 250 bar
External component treatment
Zn/Fe - standard (96h)ZN/Ni (720h) - Upon customer request
O-ring temperature range
-30 ° C to 110 ° C (standard sealing NBR - BUNA - N)-25 ° C to 140 ° C - HNBR - Upon customer request-23 ° C to 225 ° C - FKM - Upon customer request
Oil temperature range
-30 ° C to 110 ° C
Fluids
Mineral - based or synthetics with lubricating properties
Viscosities
7,4 to 420 cSt
Filtration
20 / 18 / 15 ISO 4406 (maximum filtration admitted)
Orientation
No restrictions
Installation torque
35 - 40 Nm Hex 24
Oil testing condition
ISO VG 46 cSt
Seal Kit
SK.032 and SK.087 (coil)
Coil
26 W
Performance and Validation test performed with VIS products CCR1D.C12.L0 (12Vdc-26W) and CCR1D.C24.L0 (24Vdc-26W)
Performance and Validation test performed with VIS products CCR1D.C12.L0 (12Vdc-26W) and CCR1D.C24.L0 (24Vdc-26W)
Weight
0,210 Kg
Performance details
