Shuttle Valves - Insert Type
SHV0.G18
GAS Cartridge - 350 bar
Direct acting - Ball Type
Description
Shut-off valves for hydraulics systems, with two inlets and one outlet. Ball seat construction, automatic switching. The inlet with the higher pressure (port 1 or 3) is directly connected to tank (port 2), while the second inlet (port 3 or 1) is shut off.
Technical Features
All valve parts are made of high strength steel to guarantee minimal wear and to extend service life. The very compact size make it suitable for installation into hydraulic integrated circuits, control units, and various valve combinations. Gas cavity.
Technical data
Maximum operating pressure
350 bar
Maximum flow
10 l/min
Maximum internal leakage
0,25 cm3/min @ 350 bar
O-ring temperature range
-30 ° C to 110 ° C (standard sealing NBR - BUNA - N)-35 ° C to 140 ° C - HNBR - Upon customer request-23 ° C to 225 ° C - FKM - Upon customer request
Oil temperature range
-30 ° C to 110 ° C
Fluids
Mineral - based or synthetics with lubricating properties
Viscosities
7,4 to 420 cSt
Filtration
20 / 18 / 15 ISO 4406 (maximum filtration admitted)
Orientation
No restrictions
Installation torque
7 - 9 Nm Hex 4
Oil testing condition
ISO VG 46 cSt
Seal Kit
SK.023
Weight
0,006 Kg
Cross Section
Cavity Details
Performance details
Note:
The performance chart illustrates flow handling capacity in max flow condition. p/Q curves are recorded at TOil = 40°C and 46 cSt Spring Options:
Click here to change the graphOrdering code
Similar products
