Check Valves - Insert Type
CVB0.G34
GAS Insert - 350 bar
Direct acting - Ball type
Description
A screw-in, direct acting, ball type in-line check valve. Main use is as a blocking or load-holding device. The CVB0.G34 allows flow passage from port 1 to 2: the cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at port 1 to open to 2. The flow is blocked in the opposite direction (2 to 1). Reserved installation is possible (except for size G18) yet not recommended.
Technical Features
External surfaces are oxide burnished and corrosion-protected. All valve parts are made of high strength steel. Compact size. GAS cavity.
Technical data
Maximum operating pressure
350 bar
Maximum flow
80 l/min
Maximum internal leakage
0,1 cm3/min @ 10 bar 0,1 cm3/min @ 350 bar
O-ring temperature range
-30 ° C to 110 ° C (standard sealing NBR - BUNA - N)-35 ° C to 140 ° C - HNBR - Upon customer request-23 ° C to 225 ° C - FKM - Upon customer request
Oil temperature range
-30 ° C to 110 ° C
Fluids
Mineral - based or synthetics with lubricating properties
Viscosities
7,4 to 420 cSt
Filtration
20 / 18 / 15 ISO 4406 (maximum filtration admitted)
Orientation
No restrictions
Installation Tool
IK.010
Installation torque
20 Nm Hex 8
Oil testing condition
ISO VG 46 cSt
Seal Kit
SK.022
Weight
0,082 Kg
Cross Section
Cavity Details
Performance details
Spring Options:
Click here to change the graphNote:
The performance chart illustrates flow handling capacity. p/Qcurves are recorded at TOil = 40°C and 46 cSt. Spring Options:
Click here to change the graphOrdering code
Similar products
