Check Valves - Insert Type
ICV6.M16
METRIC Insert - 420 bar
Direct acting - Poppet type
Hybrid cavity - Compact size
Description
A screw-in, direct acting, poppet type check valve. Main use is as a blocking or load-holding device. The ICV6.M16 allows flow passage from port 1 to 2: the cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at port 1 to open to 2. The flow is blocked in the opposite direction (2 to 1). Insert type valve: the poppet seals directly against the cavity.
Technical Features
All external surfaces are zinc plated and corrosion-proof. All valve parts are made of high strength steel. Poppet is hardened and ground to guarantee minimal wear and to extend service life. Compact size.
Technical data
Maximum operating pressure
420 bar
Maximum flow
40 l/min
Maximum internal leakage
0,1 cm3/min @ 30 bar 0,1 cm3/min @ 350 bar
External component treatment
Zn/Fe - standard (96h)Zn/Ni (720h) - Upon customer request
O-ring temperature range
-30 ° C to 110 ° C (standard sealing NBR - BUNA - N)-35 ° C to 140 ° C - HNBR - Upon customer request-23 ° C to 225 ° C - FKM - Upon customer request
Oil temperature range
-30 ° C to 110 ° C
Fluids
Mineral - based or synthetics with lubricating properties
Viscosities
7,4 to 420 cSt
Filtration
20 / 18 / 15 ISO 4406 (maximum filtration admitted)
Orientation
No restrictions
Installation torque
25 - 30 Nm Hex 12
Oil testing condition
ISO VG 46 cSt
Coining kit
CK.001
Weight
0,021 Kg
Cross Section
Cavity Details
Performance details
Note:
The performance chart illustrates flow handling capacity for standard bias springs. p/Q curves are recorded at TOil = 40°C and 46 cSt. Spring Options:
Click here to change the graphOrdering code
Similar products
