Solenoid Valves - Cartridge Style
Rev. 2 - 10/2025
SVT0.S12
SAE Cartridge - 350 bar
NC Single Lock Pilot Operated
Poppet type
Description
A solenoid valve operated, 2-way 2-positions, normally closed, piloted poppet type, screw-in cartridge valve. Typically used as a blocking or load holding device for high pressure circuits. When the coil is de-energized, the SVT0.S12 acts as check valve allowing free flow from 1 to 2, while blocking from 2 to 1. When the coil is energized the poppet lifts and opens both the 2 to 1 and 1 to 2 flow paths. The rigid design using a 1-piece body contributes to minimize the effect of eccentricities in cavity and provides great reliability. Low pressure drop thanks to optimized flow path.
Technical Features
All external surfaces are zinc plated and corrosion-proof. All valve parts are made of high strength steel. Poppet is hardened and ground to ensure minimal wear and extended service life. Coil seals protect the solenoid system. Manual override options. Industry SAE common cavity.
Technical data
Maximum operating pressure
350 bar
Maximum flow
150 l/min
Switch ON Time
40 ms
Switch OFF Time
90 ms
Maximum internal leakage
0,25 cm3/min @ 350 bar
External component treatment
Zn/Fe - standard (96h)Zn/Ni (720h) - Upon customer request
O-ring temperature range
-30 ° C to 110 ° C (standard sealing NBR - BUNA - N)-35 ° C to 140 ° C - HNBR - Upon customer request-23 ° C to 225 ° C - FKM - Upon customer request
Oil temperature range
-30 ° C to 110 ° C
Fluids
Mineral - based or synthetics with lubricating properties
Viscosities
7,4 to 420 cSt
Minimum pull-in voltage
85% of nominal
Filtration
20 / 18 / 15 ISO 4406 (maximum filtration admitted)
Orientation
No restrictions
Installation torque
85 - 95 Nm Hex 32
Oil testing condition
ISO VG 46 cSt
Seal Kit
SK.077 and SK.027 (coil)
Coil
Weight
0,254 Kg
Cross Section
Cavity Details
Performance details
Configuration:
Click here to change the graphNote:
The performance chart illustrates flow handling capacity in both directions (1 to 2 de-energized, 2 to 1 energized). p/Q curve is recorded at TOil = 40°C and 46 cSt. Configuration:
Click here to change the graphOrdering code
